Electrical pneumatic conveyors

Electrical pneumatic conveyors for diluted phase conveyance

 

The pneumatic conveying in diluted phase provides a lower concentration of product in the pipes with a higher percentage of air than in the dense phase. This means that the product is transported very quickly and in a diluted way inside the pipes with relatively low depressions.

In this configuration the material will tend to float inside the pipes, so it is not indicated if you want to preserve the product or not to mix it.

 

Conveyors of powders, granules and solids – short distance

 

Extremely compact single-phase conveyors for the efficient short-distance transport of dry and light powders. Transport with the best value for money of the product range.

Find the model for short distance

PRO280E

 

Dilute phase pneumatic conveyor with a single-phase motor. Conveyor for powders > 1μm and free flowing grains when they need to remain intact.
Fully automatic functional logic, a system designed for both continuous operation and potential-free contact.

 

Certified for food use, AISI 304 stainless steel for parts in contact with the product, glossy finish interior and satin finish exterior. Various build and product discharge options available. Wide range of accessories specific to powder transport applications.

Index Unit PRO280E 2,2kW PRO280E 4,3kW
Voltage V – Hz 400-50 3~ 400-50 3~
Power kW 2,2 4,3
Max. air flow m3/h 318 320
Max. waterlift mbar 360
Material-Efficiency IEC 60335-2-69 Polyester-ANT M Polyester-ANT M
Air cleaning consumption Nl/min 350 350
Ø Unload/Outlet mm 100 100
Type of unloading Balanced valve plug Balanced valve plug
Weight kg 15 15
Max. load volume l 8 8
Ø P. conveying system mm 50 50
Dimensions cm Ø280-h740 Ø280-h740
Transport capacity kg/h 930/460/310
Distance Mt 5/10/15
Max. water lift mmH2O 210

Conveyors of powders, granules and solids – long distance

 

Single-phase or three-phase conveyors for the long-distance transport of powders and granules. This unit can be extremely tailored to fit customer’s needs, thanks to the modularity of the components: separated or integrated suction units that can be boosted at a later time, without having to replace the entire pneumatic conveyor. Multiple construction options for the total integration on customer’s machinery and for constructive needs. Top quality conveying.

Find the model for long distance

TECH280E and TECH420E

 

Dilute phase pneumatic conveyor, equipped with electric side channel blower and three-phase motor (with or without inverter) from 2.2 to 15 kW. Conveyor for powders > 1μm and grains with poor flow, when they need to remain intact. Because the pneumatic conveyor is modular in design, it is possible to increase transport power at a later date, without having to replace the entire unit.
Fully automatic functional logic, a system designed for both continuous operation and potential-free contact.

 

AISI 304 stainless steel for parts in contact with the product, glossy finish interior and satin finish exterior. Various build and product discharge options available. Wide range of accessories specific to powder transport applications

Index Unit TECH280E 2,2kW TECH280E 4,3kW TECH420E D60 7,5kW TECH420E D100 15kW
Voltage V – Hz 400-50 3~ 400-50 3~ 400-50-1~ 230-50-1~
Power kW 2,2 4,3 7,5 15
Max. air flow m3/h 318 320 525 720
Max. waterlift mbar 360 320 530
Material-Efficiency IEC 60335-2-69 Polyester-ANT M Polyester-ANT M Polyester-ANT M Polyester-ANT M
Air cleaning consumption Nl/min 350 350 350 350
Ø Unload/Outlet mm 100 100 150-250 150-250
Type of unloading Clapet valve Clapet valve Clapet valve Clapet valve
Weight kg 22 22 86 28
Max. load volume l 8 8 20 20
Ø P. conveying system mm 50 50 60-50 100-80
Dimensions cm Ø280-h740 Ø280-h740 Ø420-h930 Ø420-h980
Transport capacity kg/h 1.020/490/340 1.600/970/580/350 3.700/2.200/1.300/650
Distance Mt 5/10/15 5/10/15/20 10/15/20/25
Max. water lift mmH2O 210

ADVANTAGES

 

  • Customization and configuration available according to specific needs
  • Easy to install, turn on, use and sanitize
  • No obstruction or environmental pollution
  • CE-certified, FDA-certified system for food application. A wide range of optional accessories is available
  • Increased productivity
  • Low economic impact and reduced operating and maintenance costs
  • Product quality and integrity preservation
  • Improved hygiene and operational conditions
  • The system includes a side channel blower, which is a silent, powerful three-phase motor which requires no maintenance